ESP32 Camera ModuleArduino Camera, Raspberry Pi Camera, OV2640 2 Mega Pixels Camera, with Type C Port and 3D WiFi Antenna, Mini Camera Board for Arduino, Raspberry Pi 3B/3B+ and Pi 2B+ IOT DIY

#ad
MakerFocus NA #ad - M5stack esp32 camera: the m5stack esp32 camera is a tiny module based on esp32 chip and ov2640 sensor. It can output images up to 800*600 JPEG. Ov2640 sensor 's parameter:standard sccb interface, compatible with i2c interface;output formats8-bit is yuv422/420/ycbcr422; rgb565/555; 8-bit compressed data; 8-/10-bit Raw RGB data; UXGA/SXGA: 15fps; SVGA: 30fps; CIF: 60fps; Scan Mode: Progressive.

For people: software / hardware product engineers, start-ups, enthusiasts, designers, project contractors, educational groups amd Maker groups. You can program it through the ESP-IDF. Esp32 camera module, with type c port and 3d wifi antenna, mini camera board for arduino, ov2640 2 mega pixels camera 1632 * 1232 uxga, raspberry pi 3B/3B+ and Pi 2B B+ IOT DIYParameters:ESP32 Chip:Dual-core Tensilica LX6 microprocessorUp to 240MHz clock frequency520kB internal RAM4MB Flash memoryIntegrated 802.

ESP32 Camera ModuleArduino Camera, Raspberry Pi Camera, OV2640 2 Mega Pixels Camera, with Type C Port and 3D WiFi Antenna, Mini Camera Board for Arduino, Raspberry Pi 3B/3B+ and Pi 2B+ IOT DIY #ad - 11 bgn wifi transceiverintegrated dual-mode bluetooth classic and blehardware accelerated encryption aes, rsa-4096cp2104 usb ttlov2640 sensor:standard sccb interface, ecc, sha2, compatible with i2c interfaceoutput formats8-bit:YUV422/420/YCbCr422RGB565/5558-bit compressed data8-/10-bit Raw RGB dataMaximum Image Transfer RateUXGA/SXGA: 15fpsSVGA: 30fpsCIF: 60fpsScan Mode: ProgressiveCamera:CMOS size: 1/4"Field of View : 78°best sensor resolution: 1600 * 1200IO voltage: 1.

7v-3. 3vanalog voltage: 2. 5-3. 0v internal LDO powers 1. 2v to the corepower consumption: tbd sleep andlt;20μatemperature operation: -30°C to 70°CStable work: 0°C to 50°CMaximum rms rate: 15fps SXGASensitivity: 1.

#ad



ESP32 Cam WiFi&Bluetooth Camera Module Development Board with OV2640 Camera Module - 2 Pack

#ad
AGOAL #ad - Major features: 1: Ultra-small 802. 11b/g/n wi-fi + bt/ble soc module 2: low-power dual-core 32-bit cpu for application processors 3: up to 240mhz, external 4m psram 5:supports interfaces such as uart/spi/i2c/pwm/adc/dac 6:support ov2640 and ov7670 cameras with built-in flash 7:support for images wifi upload 8:support tf card 9:support multiple sleep modes 10:Embedded Lwip and FreeRTOS 11:Support STA/AP/STA+AP working mode 12:Support Smart config/Airkiss one-click distribution network 13:Support for serial local upgrade and remote firmware upgradeFOTA 14:Support secondary development Package Included: ESP32-CAM Module x 2 Camera Module OV2640 2MP x 2 Esp32-cam is a wifi&bluetooth dual-mode development board, up to 600 DMIPS 4:Built-in 520 KB SRAM, which uses PCB on-board antennas and cores based on ESP32 chips.

ESP32 Cam WiFi&Bluetooth Camera Module Development Board with OV2640 Camera Module - 2 Pack #ad - It can work independently as a minimum system. Moreover, we provide a 12-month warranty for quality-related issues and guarantee 7*24 after-sale service. Warm tips: this product contains the OV2640 Camera Module. Esp32-cam can be widely used in various iot applications. Esp integrates wifi, traditional bluetooth, main frequency adjustment range 80MHz to 240MHz, with two high-performance 32-bit lx3 cpus, 7-stage pipeline architecture, hall sensor, on-chip sensor, and BLE Beacon, temperature sensor and so forth.

Fully compliant with wifi 802. 11b/g/n/e/i and bluetooth 4.

#ad



HiLetgo ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDE

#ad
HiLetgo 3-01-1287 #ad - Ultra-low power consumption, works perfectly with the Arduino IDE. Supportthree modes: ap, STA, and AP+STA. Hiletgo esp-wroom-32 esp32 esp-32s Development Board 2. 4ghz dual-mode wifi + bluetooth dual cores microcontroller the esp32 integrated with Antenna switches, RF Balun, low-noise amplifiers, power amplifiers, and management modules, filters, and the entire solution occupies the least area of PCB.

Moreover, we provide a 12-month warranty for quality-related issues and guarantee 7*24 after-sale service. It can work independently as a minimum system. To reference gpio pins in code use just the number, for example "digitalWrite13, HIGH" sets GPIO13 high. Esp32 is a safe, reliable, and scalable to a variety of applications.

HiLetgo ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDE #ad - Reference links of ESP32 at below: https://github. Com/espressif/arduino-esp32 https://github. Com/nodemcu/nodemcu-firmware/tree/dev-esp32 package included: 1 * eSP-WROOM-32 ESP32 ESP-32S Development BoardIf it cann't get bluetooth working? Using Node32s as the Board selection. Esp32-cam is a wifi&bluetooth dual-mode development board, which uses PCB on-board antennas and cores based on ESP32 chips.

2. 4ghz dual mode wifi + Bluetooth Development Board. It is suitable for home smart devices, wireless monitoring, wireless positioning system signals, industrial wireless control, QR wireless identification, and other IoT applications.

#ad



HiLetgo ESP32 OLED WiFi Kit ESP-32 0.96 Inch Blue OLED Display WiFi+Bluetooth CP2012 Internet Development Board for Arduino ESP8266 NodeMCU

#ad
HiLetgo REES-01 #ad - It is suitable for home smart devices, QR wireless identification, wireless positioning system signals, wireless monitoring, industrial wireless control, and other IoT applications. Support lwIP protocol, Freertos. 2. 4ghz dual mode wifi + Bluetooth Development Board. English documentation: https://robotzero.

One/heltec-wifi-kit-32/; https://github. Com/heltec-aaron-Lee/WiFi_Kit_series. Here is the link with English documentation: https://hackaday. Io/project/26991-esp32-board-wifi-lora-32 https://robotzero. One/heltec-wifi-kit-32/; https://github. Com/heltec-aaron-lee/WiFi_Kit_series; Operating voltage: 3. 3v to 7v operating temperature range: -40 ° c to + 90 ° c supports sniffer, 72 mbps @ 11n ht20, softap and wi-fi direct modes Data rate: 150 Mbps @ 11n HT40, Station, 54 Mbps @ 11g, 11 Mbps @ 11b Transmit power: 19.

HiLetgo ESP32 OLED WiFi Kit ESP-32 0.96 Inch Blue OLED Display WiFi+Bluetooth CP2012 Internet Development Board for Arduino ESP8266 NodeMCU #ad - 5 dbm @ 11b, 16. 5 dbm @ 11g, 15. 5 dbm @ 11n receiver sensitivity up to - 98 dbm uDP continues to throughput by 135 Mbps Package included: 1* ESP32 096" oled wifi bluetooth development board esp32-cam is a wifi&bluetooth dual-mode development board, which uses PCB on-board antennas and cores based on ESP32 chips.

Instructable for internet time: https://www.

#ad



HiLetgo FT232RL FTDI Mini USB to TTL Serial Converter Adapter Module 3.3V 5.5V FT232R Breakout FT232RL USB to Serial Mini USB to TTL Adapter Board for Arduino

#ad
HiLetgo 3-01-0661-1 #ad - Pin definition: dtr, tx, VCC, rxd, cts, GND. Support win95/98/98se/me/2000/xp/win7 32bit 64bit /Vsita/, do not Support Win8. Driver library - u8g2: https://github. Com/olikraus/u8g2. Pitch:2. 54mm. Esp32-cam can be widely used in various iot applications. Esp integrates wifi, with two high-performance 32-bit lx3 cpus, main frequency adjustment range 80MHz to 240MHz, 7-stage pipeline architecture, and BLE Beacon, on-chip sensor, traditional Bluetooth, hall sensor, temperature sensor and so forth.

Fully compliant with wifi 802. 11b/g/n/e/i and bluetooth 4. 2 standards, it can be used as a master mode to build an independent network controller, or as a slave to other hosts MCUs to add networking capabilities to existing devices. Support lwIP protocol, Freertos. Moreover, we provide a 12-month warranty for quality-related issues and guarantee 7*24 after-sale service.

HiLetgo FT232RL FTDI Mini USB to TTL Serial Converter Adapter Module 3.3V 5.5V FT232R Breakout FT232RL USB to Serial Mini USB to TTL Adapter Board for Arduino #ad - Specifications: usb power has over current protection, using 500MA self-restore fuse. Ultra-low power consumption, works perfectly with the Arduino IDE. It is suitable for home smart devices, wireless positioning system signals, wireless monitoring, QR wireless identification, industrial wireless control, and other IoT applications.

Rxd/txd transceiver communication indicator. It can work independently as a minimum system.

#ad



MakerFocus ESP32 Camera Module,Including OV2640 Camera,ESP32 WROVER and PSRAM Flash, Type-C Grove Port Mini Camera Development Board Building Brick IOT DIY

#ad
MakerFocus NA #ad - It is an ideal solution for IoT applications. About agoal: our goal with this store and company is to offer customers high-quality and innovative products at a low price. Ultra-low power consumption, works perfectly with the Arduino IDE. Support lwIP protocol, Freertos. Driver library - u8g2: https://github. Com/olikraus/u8g2.

It is suitable for home smart devices, wireless monitoring, industrial wireless control, wireless positioning system signals, QR wireless identification, and other IoT applications. Esp32 wifi kit for arduino eSP8266 NodeMCU. Instructable for internet time: https://www. Instructables. Com/id/wifi-kit-32-ntp-clock/; Install guide and bunches of info: https://github.

MakerFocus ESP32 Camera Module,Including OV2640 Camera,ESP32 WROVER and PSRAM Flash, Type-C Grove Port Mini Camera Development Board Building Brick IOT DIY #ad - Com/heltec-aaron-Lee/WiFi_Kit_series. Note: extended use of the camera module is not recommended due to it's tendency overheat! Filming in short burst is recommended. Ov2640 camera module: cmos size: 1/4", field of view : 78°, signal to noise ratio: 40 db, best sensor resolution: 1600 * 1200, IO voltage: 1.

7v-3. 3v. For people: software / hardware product engineers, start-ups, enthusiasts, designers, project contractors, educational groups amd Maker groups.

#ad



TTGO T-Camera ESP32-WROVER-B OV2640 Camera Module ESP32 WROVER & PSRAM Camera Module 0.96 OLED ESP32-WROVER Fish-Eye Lens

#ad
TTGO . #ad - 2. 4ghz dual mode wifi + Bluetooth Development Board. Esp32-cam can be widely used in various iot applications. It can work independently as a minimum system. Pin definition: dtr, cts, rxd, VCC, tx, GND. Support win95/98/98se/me/2000/xp/win7 32bit 64bit /Vsita/, do not Support Win8. Chipset: ft232rl, not genuine ftdi chip, Working Voltage: 3.

TTGO T-Camera ESP32-WROVER-B OV2640 Camera Module ESP32 WROVER & PSRAM Camera Module 0.96 OLED ESP32-WROVER Fish-Eye Lens #ad - 3v/5. 5v. Moreover, we provide a 12-month warranty for quality-related issues and guarantee 7*24 after-sale service. Supportthree modes: ap, STA, and AP+STA. Esp32 wifi kit for arduino eSP8266 NodeMCU. Support lwIP protocol, Freertos. Ultra-low power consumption, works perfectly with the Arduino IDE. Esp integrates wifi, main frequency adjustment range 80mhz to 240MHz, 7-stage pipeline architecture, and BLE Beacon, with two high-performance 32-bit lx3 cpus, hall sensor, traditional Bluetooth, on-chip sensor, temperature sensor and so forth.

Fully compliant with wifi 802. 11b/g/n/e/i and bluetooth 4. 2 standards, it can be used as a master mode to build an independent network controller, or as a slave to other hosts MCUs to add networking capabilities to existing devices. Operating voltage: 3.

#ad



4 Pack - ESP32 Cam WiFi&Bluetooth Camera Module Development Board with OV2640 Camera Module

#ad
AGOAL #ad - Note: extended use of the camera module is not recommended due to it's tendency overheat! Filming in short burst is recommended. Ov2640 camera module: cmos size: 1/4", field of view : 78°, best sensor resolution: 1600 * 1200, signal to noise ratio: 40 db, IO voltage: 1.7v-3. 3v. For people: software / hardware product engineers, start-ups, project contractors, enthusiasts, designers, educational groups amd Maker groups.

We have a strong after-sales service team: as long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click "MakerFocus" and click "Ask a question" to email us! Looking forward to your consultation!

4 Pack - ESP32 Cam WiFi&Bluetooth Camera Module Development Board with OV2640 Camera Module #ad - Driver library - u8g2: https://github. Com/olikraus/u8g2. Esp32 is a safe, reliable, and scalable to a variety of applications. Pin definition: dtr, VCC, cts, rxd, tx, GND. Support win95/98/98se/me/2000/xp/win7 32bit 64bit /Vsita/, do not Support Win8. Operating voltage: 3. 3v to 7v; supports sniffer, Station, softAP and Wi-Fi Direct modes.

Esp32-cam can be widely used in various iot applications.

#ad



MakerFocus ESP8266 OLED WiFi Development Board 0.91 Inch ESP8266 OLED Display CP2102 Support Arduino IDE ESP8266 NodeMCU LUA

#ad
MakerFocus 8541612334 #ad - Moreover, we provide a 12-month warranty for quality-related issues and guarantee 7*24 after-sale service. Please feel free to email us if you have any questions or you would have a bulk order, soldering of headers is required. Package including1 * esp8266 development board with oled2 * pin headers Esp32-cam is a wifi&bluetooth dual-mode development board, which uses PCB on-board antennas and cores based on ESP32 chips.

How to install heltec esp8266 based dev-baords develop Environment: https://docs. Heltec. Cn/#/en/user_manual/how_to_install_esp8266_Arduino. Instructable for internet time: https://www. Instructables. Com/id/wifi-kit-32-ntp-clock/; Install guide and bunches of info: https://github. Com/heltec-aaron-Lee/WiFi_Kit_series.

MakerFocus ESP8266 OLED WiFi Development Board 0.91 Inch ESP8266 OLED Display CP2102 Support Arduino IDE ESP8266 NodeMCU LUA #ad - Note: this item comes unassembled, battery may be purchased here: https://www. Amazon. Com/dp/b07cxNQ3ZR. This esp8266 oled development board with 091 inch 128*32 oled display, write, the middle, iic, with wifi, pwm and other functions; 1 AD input, display color is white, SPI, you will have an advanced and fun development environment! It has 12 digital pins can be configured to read, Working voltage: 3.

#ad



ESP32-CAM Camera WiFi + Bluetooth Module 4M PSRAM Dual-core 32-bit CPU Development Board with OV2640 2MP Camera Module and 8dBi Wireless Network WiFi WLAN Antenna + IPEX to RP-SMA Pigtail Cable

#ad
KeeYees #ad - 2. 4ghz dual mode wifi + Bluetooth Development Board. It can work independently as a minimum system. Driver library - u8g2: https://github. Com/olikraus/u8g2. Instructable for internet time: https://www. Instructables. Com/id/wifi-kit-32-ntp-clock/; Install guide and bunches of info: https://github. Com/heltec-aaron-Lee/WiFi_Kit_series.

It is an ideal solution for IoT applications. About agoal: our goal with this store and company is to offer customers high-quality and innovative products at a low price. It is an ideal solution for IoT applications. High performance】extremely small 802. 11b / g / n wi-fi + bt / ble soc module; dual-core 5v low-power 32-bit cpu processor; Frequency up to 240 MHz, computing up to 600 DMIPS; Built-in 520 KB SRAM, external 4M PSRAM.

ESP32-CAM Camera WiFi + Bluetooth Module 4M PSRAM Dual-core 32-bit CPU Development Board with OV2640 2MP Camera Module and 8dBi Wireless Network WiFi WLAN Antenna + IPEX to RP-SMA Pigtail Cable #ad - Compact design】 esp-32cam is packaged in dip and can be directly plugged into the backplane. Moreover, we provide a 12-month warranty for quality-related issues and guarantee 7*24 after-sale service. Connect the antenna to the router or wireless network cards and enhance the transmit signal of the router.

The antenna is 8dbi, which is 10% higher than the signal enhancement of a typical 5dBi antenna. In this way, the wifi signal itself is enhanced, and the use of the product can be better used.

#ad



USB to TTL Adapter, USB to Serial Converter for Development Projects - Featuring Genuine FTDI USB UART IC 'FT232RL'

#ad
WXTEC M-FT232 #ad - For details of os compatibility and installation guidance, please scroll down this page and take a look at 'Product description'. Typical applications: usb to rs232/rs422/rs485 converters, unbrick routers and mprog3. 5, update transmitter, vendor id re-write, flash firmware on hard drive, interface to GPS modules, Support EEPROM, interface to set top box and more.

What you get: 1 x moyina usb to ttl module + 1 x jumper + 10 x dupont Cables 7. 9", which are packed by antistatic bag. Chipset: ft232rl, not genuine ftdi chip, Working Voltage: 3. 3v/5. 5v. Connect the antenna to the router or wireless network cards and enhance the transmit signal of the router. How to install heltec esp8266 based dev-baords develop Environment: https://docs.

USB to TTL Adapter, USB to Serial Converter for Development Projects - Featuring Genuine FTDI USB UART IC 'FT232RL' #ad - Heltec. Cn/#/en/user_manual/how_to_install_esp8266_Arduino. It is an ideal solution for IoT applications. About agoal: our goal with this store and company is to offer customers high-quality and innovative products at a low price. It can work independently as a minimum system. Esp32-cam can be widely used in various iot applications.

#ad