3.6 – Audio Adaptor Board for Teensy 3.0

#ad
PJRC . #ad - All 3 clocks are created by the Teensy. This audio adapter lets you easily add high quality 16 bit, 44. 1 khz sample rate cD quality audio to your projects with a Teensy 3. 2, 3. 5 or 3. 6. Audio data uses i2s signals, and 3 clocks, TX to headphones and/or line out and RX from line in or mic, LRCLK 44.1 khz, bclk 1.

41 mhz and mclK 11. 29 mhz. The i2c pins sda and scl are used to control the chip and adjust parameters. The audio chip connects to Teensy v3 using 7 signals. The sgtl5000 chip operates in "slave mode", LRCLK 44. 1 khz, and 3 clocks, tx to headphones and/or line out and RX from line in or mic, where all its clock pins are inputs.

3.6 - Audio Adaptor Board for Teensy 3.0 #ad - This audio adapter lets you easily add high quality 16 bit, 44. 1 khz sample rate cD quality audio to your projects with a Teensy 3. 2, 3. 5 or 3. 6. The audio chip connects to teensy v3 using 7 signals. Audio data uses i2s signals, BCLK 1.

#ad



PJRC Teensy 3.2

#ad
PJRC 6485230 #ad - All of this functionality is jammed into a 1. 4 x 07 inch board with all headers on a 01" grid so you can slap in on a breadboard and get to work! The Teensy 3. 2 adds a more powerful 3. 3 volt regulator, with the ability to directly power an ESP8266 Wifi, WIZ820io Ethernet, and other 3.3v add-on boards that require a little more power.

Dimensions: 1. 4 x 07" ~35 x 18 mm 32 bit arm cortex-m4 72 mhz cpu m4 = dsp extensions 256k flash Memory, 64K RAM, 2K EEPROM. Each Teensy 3. 2 comes pre-flashed with a bootloader so you can program it using the on-board usb connection: no external programmer needed! You can program for the Teensy in your favorite program editor using C or you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for Teensy! The processor on the Teensy also has access to the USB and can emulate any kind of USB device you need it to be, making it great for USB-MIDI and other HID projects.

PJRC Teensy 3.2 #ad - Also, it can provide system voltage of 3. 3v to other devices at up to 100mA. Additionally, if it is used within the Teensy 3. 1 limits of operation, the Teensy 3. 2 and 3. 1 are interchangeable! note: This does not come with a USB cable, please check below for an appropriate one.

#ad



Teensy 3.6 with pins

#ad
PJRC #ad - Microcontroller chip MK66FX1M0VMD18. 180 mhz arm cortex-m4 with floating point unit 1m flash, 4 channel digital audio input & output 14 hardware timers cryptographic acceleration unit random number generator crc computation unit 6 serial ports 2 with fifo & fast baud rates 3 spi ports 1 with fifo 4 i2c ports real time clock 32 bit arm cortex-m4 72 mhz cpu m4 = dsp extensions 256k flash memory, 4k eeprom microcontroller chip MK66FX1M0VMD18 USB High Speed 480 Mbit/sec Port 2 CAN Bus Ports 32 General Purpose DMA Channels 22 PWM Outputs 4 I2C Ports 11 Touch Sensing Inputs 62 I/O Pins 42 breadboard friendly 25 Analog Inputs to 2 ADCs with 13 bits resolution 2 Analog Outputs DACs with 12 bit resolution 22 PWM Outputs USB Full Speed 12 Mbit/sec Port Ethernet mac, 64K RAM, 256K RAM, capable of full 100 Mbit/sec speed Native 4 bit SDIO micro SD card port I2S Audio Port, 2K EEPROM.

Teensy 3.6 with pins #ad - 7 timers for intervals/delays, separate from PWM USB with dedicated DMA memory transfers. 1m flash, 256k ram, 4k eePROM. 3 uarts serial ports spi, can bus, i2c, i2s, IR modulator I2S for high quality audio interface. The teensy 3. 2 adds a more powerful 3. 3 volt regulator, wiz820io ethernet, with the ability to directly power an ESP8266 Wifi, and other 3.

3v add-on boards that require a little more power. 180 mhz arm cortex-m4 with Floating Point Unit.

#ad



Teensy 3.2 with Pins

#ad
PJRC . #ad - Teensy 3. 2 adds a more powerful 3. 3 volt regulator, with the ability to directly power ESP8266 Wifi, WIZ820io Ethernet and other power-hungry 3. 3v add-on boards 32 bit arm cortex-m4 72 mhz cpu m4 = dsp extensions 256k flash Memory, 64K RAM, 2K EEPROM. Microcontroller chip MK66FX1M0VMD18. The teensy is a breadboard-friendly development board with loads of features in a, well, teensy package.

Teensy 3.2 with Pins #ad - Teensy 3. 2 and 3. 1 have exactly the same pinout. Teensy 3. 2 provides more power on its 3. 3v pin, and accepts a wider voltage input range. The teensy 3. 2 brings a 32 bit arm cortex microprocessor into the mix so you can do some serious number crunching. The teensy 3. 2 comes pre-flashed with a bootloader so you can program it using the on-board usb connection: no external programmer needed! You can program for the Teensy in your favorite program editor using C or you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for Teensy! The processor on the Teensy also has access to the USB and can emulate any kind of USB device you need it to be, making it great for USB-MIDI and other HID projects.

. All of this functionality is jammed into a 1. 4 x 0

#ad



Teensy 3.6 Without Pins

#ad
PJRC #ad - 7 timers for intervals/delays, separate from PWM USB with dedicated DMA memory transfers. Teensy 3. 2 and 3. 1 have exactly the same pinout. Teensy 3. 2 provides more power on its 3. 3v pin, and accepts a wider voltage input range. 180 mhz arm cortex-m4 with Floating Point Unit. Pre-soldered header pins. 1m flash, 256k ram, 4k eePROM.

Microcontroller chip MK66FX1M0VMD18. 1m flash, 256k ram, 4k eePROM. Microcontroller chip MK66FX1M0VMD18. 21 high resolution analog inputs 13 bits usable, 16 bit hardware 34 Digital I/O Pins 5V tolerance on Digital Inputs 12 PWM outputs. 180 mhz arm cortex-m4 with floating point unit 1m flash, 4k eeprom microcontroller chip mk66fx1m0vmd18 usb high speed 480 mbit/sec port 2 can bus ports 32 general purpose dma channels 22 pwm outputs 4 i2c ports 11 touch sensing inputs 62 i/o pins 42 breadboard friendly 25 analog inputs to 2 adcs with 13 bits resolution 2 analog outputs dacs with 12 bit resolution 22 pwm outputs usb full Speed 12 Mbit/sec Port Ethernet mac, 256K RAM, 4 Channel Digital Audio Input & Output 14 Hardware Timers Cryptographic Acceleration Unit Random Number Generator CRC Computation Unit 6 Serial Ports 2 with FIFO & Fast Baud Rates 3 SPI Ports 1 with FIFO 4 I2C Ports Real Time Clock 32 bit arm cortex-m4 72 mhz cpu m4 = dsp extensions 256k flash Memory, capable of full 100 Mbit/sec speed Native 4 bit SDIO micro SD card port I2S Audio Port, 64K RAM, 2K EEPROM.

Teensy 3.6 Without Pins #ad - . 3 uarts serial ports spi, can bus, i2c, i2s, IR modulator I2S for high quality audio interface. The teensy 3. 2 adds a more powerful 3.

#ad



PJRC Teensy 4.0 Without pins

#ad
PJRC #ad - 1024k ram 512k is tightly coupled 2048k flash 64k reserved for recovery & eeprom emulation 2 usb ports, all interrrupt capable 14 analog pins, all with 16 word fifo 3 i2c, all with 4 byte fifo 32 general purpose dma channels 31 pwm pins 40 digital pins, all with 4 byte FIFO 7 Serial, both 480 MBit/sec 3 CAN Bus 1 with CAN FD 2 I2S Digital Audio 1 S/PDIF Digital Audio 1 SDIO 4 bit native SD 3 SPI, 2 ADCs on chip Cryptographic Acceleration Random Number Generator RTC for date/time Programmable FlexIO Pixel Processing Pipeline Peripheral cross triggering Power On/Off management Actual size is 1.

PJRC Teensy 4.0 Without pins #ad - 4 by 07 inch, same form-factor as Teensy 3. 2. Pre-soldered header pins. 32 bit arm cortex-m4 72 mhz cpu m4 = dsp extensions 256k flash Memory, 64K RAM, 2K EEPROM. 1m flash, 256k ram, 4k eePROM. Teensy 3. 2 and 3. 1 have exactly the same pinout. Teensy 3. 2 provides more power on its 3. 3v pin, and accepts a wider voltage input range.

#ad



Audio Adaptor Board for Teensy 4.0

#ad
PJRC #ad - Pre-soldered header pins. All 3 clocks are created by the Teensy. 2 usb ports, both 480 MBit/sec. Audio data uses i2s signals, tx to headphones and/or line out and RX from line in or mic, and 3 clocks, LRCLK 44.1 khz, bclk 1. 41 mhz and mclK 11. 29 mhz. 32 bit arm cortex-m4 72 mhz cpu m4 = dsp extensions 256k flash Memory, 64K RAM, 2K EEPROM.

1m flash, 256k ram, 4k eePROM. Audio data uses i2s signals, and 3 clocks, TX to headphones and/or line out and RX from line in or mic, LRCLK 44.1 khz, bclk 1. 41 mhz and mclK 11. 29 mhz. Microcontroller chip MK66FX1M0VMD18. The sgtl5000 chip operates in "slave mode", where all its clock pins are inputs. This version rev.

Audio Adaptor Board for Teensy 4.0 #ad - The i2c pins sda and scl are used to control the chip and adjust parameters. The i2c pins sda and scl are used to control the chip and adjust parameters. This audio adapter lets you easily add high quality 16 bit, 44. 1 khz sample rate cD quality audio to your projects with a Teensy 4. 0

#ad



DEPEPE 30 Pcs 40 Pin 2.54mm Male and Female Pin Headers for Arduino Prototype Shield

#ad
DEPEPE #ad - D is for Teensy 4. 0 only. Audio data uses i2s signals, tx to headphones and/or line out and RX from line in or mic, and 3 clocks, LRCLK 44.1 khz, bclk 1. 41 mhz and mclK 11. 29 mhz. 1m flash, 256k ram, 4k eePROM. 7 timers for intervals/delays, separate from PWM USB with dedicated DMA memory transfers. 2 i2s digital Audio.

Come with 15pcs male headers and 15pcs female headers. 1m flash, 256k ram, 4k eePROM. Microcontroller chip MK66FX1M0VMD18. The sgtl5000 chip operates in "slave mode", where all its clock pins are inputs. This version rev. 21 high resolution analog inputs 13 bits usable, 16 bit hardware 34 Digital I/O Pins 5V tolerance on Digital Inputs 12 PWM outputs.

DEPEPE 30 Pcs 40 Pin 2.54mm Male and Female Pin Headers for Arduino Prototype Shield #ad - The audio chip connects to teensy using 7 signals. The i2c pins sda and scl are used to control the chip and adjust parameters. 3 can bus 1 with CAN FD. All 3 clocks are created by the Teensy. 1024k ram 512k is tightly coupled. Pre-soldered header pins. 3 uarts serial ports spi, i2c, i2s, can bus, IR modulator I2S for high quality audio interface.

#ad



Teensy 3.5 Without Pins

#ad
PJRC MK64FX512 #ad - Teensy 3.5 Without Pins #ad - 2048k flash 64k reserved for recovery & EEPROM emulation. The i2c pins sda and scl are used to control the chip and adjust parameters. 1024k ram 512k is tightly coupled. The sgtl5000 chip operates in "slave mode", where all its clock pins are inputs. This version rev. Made of copper and plastic. 120 mhz arm cortex-m4 with floating point unit 512k flash, 4 channel digital audio input & output 14 hardware timers cryptographic acceleration unit random number generator crc computation unit 6 serial ports 2 with fifo & fast baud rates 3 spi ports 1 with fifo 3 i2c ports real time clock 32 bit arm cortex-m4 72 mhz cpu m4 = dsp extensions 256k flash memory, 64k RAM, 192K RAM, capable of full 100 Mbit/sec speed Native 4 bit SDIO micro SD card port I2S Audio Port, 4K EEPROM Microcontroller Chip MK64FX512VMD12 1 CAN Bus Port 16 General Purpose DMA Channels 5 Volt Tolerance On All Digital I/O Pins 62 I/O Pins 42 breadboard friendly 25 Analog Inputs to 2 ADCs with 13 bits resolution 2 Analog Outputs DACs with 12 bit resolution 20 PWM Outputs USB Full Speed 12 Mbit/sec Port Ethernet mac, 2K EEPROM.

The audio chip connects to teensy using 7 signals. 1m flash, 256k ram, 4k eePROM. 21 high resolution analog inputs 13 bits usable, 16 bit hardware 34 Digital I/O Pins 5V tolerance on Digital Inputs 12 PWM outputs. Pitch: 2. 54mm, number of pins: 40pin. 3 can bus 1 with CAN FD.

#ad



Glarks 112Pcs 2.54mm Male and Female Pin Header Connector Assortment Kit, 100pcs Stackable Shield Header and 12pcs Breakaway PCB Board Pin Header for Arduino Prototype Shield

#ad
Glarks 8541770554 #ad - The i2c pins sda and scl are used to control the chip and adjust parameters. Made of copper and plastic. 512k flash, 192k ram, 4k eePROM. 1m flash, 256k ram, 4k eePROM. The sgtl5000 chip operates in "slave mode", where all its clock pins are inputs. This version rev. 120 mhz arm cortex-m4 with Floating Point Unit.

Material: Insulated plastic, hard metal pin. 2 usb ports, both 480 MBit/sec. All 3 clocks are created by the Teensy. Microcontroller chip MK66FX1M0VMD18. Audio data uses i2s signals, and 3 clocks, TX to headphones and/or line out and RX from line in or mic, LRCLK 44.1 khz, bclk 1. 41 mhz and mclK 11. 29 mhz. Microcontroller chip MK64FX512VMD12.

Glarks 112Pcs 2.54mm Male and Female Pin Header Connector Assortment Kit, 100pcs Stackable Shield Header and 12pcs Breakaway PCB Board Pin Header for Arduino Prototype Shield #ad - 3 can bus 1 with CAN FD. Pitch: 2. 54mm, number of pins: 40pin. 2 i2s digital Audio. 1.

#ad



Cylewet 5Pcs KY-040 Rotary Encoder Module with 15×16.5 mm with Knob Cap for Arduino Pack of 5 CYT1062

#ad
Qianxin #ad - With the key on the rotary encoder, you can reset to the initial state, that is, counting from 0. The material of Knob Cap: aluminium alloy. What you get: this kit includes all types of pin headers you need, 40pcs short needle female pin headers, including 50pcs long needle female pin headers, 12pcs breakaway male and female pin headers, 10 double pin headers, stored in a transparent plastic box to meets all your needs in one kit.

2. Microcontroller chip MK66FX1M0VMD18. All products spacing: 2. 54mm/01 inches; number of pins: 4/6/8/10/40; Row Type: Single row and double row. Great tools for arduino prototype shield. This audio adapter lets you easily add high quality 16 bit, 44. 1 khz sample rate cD quality audio to your projects with a Teensy 4.

Cylewet 5Pcs KY-040 Rotary Encoder Module with 15×16.5 mm with Knob Cap for Arduino Pack of 5 CYT1062 #ad - 0512k flash, 192k ram, 4k eePROM. With the key on the rotary encoder, you can reset to the initial state, that is, counting from 0.7 timers for intervals/delays, separate from PWM USB with dedicated DMA memory transfers. Pre-soldered header pins. The material of knob cap: aluminium alloy The Specification of Knob Cap: diameter: 15mm/ 0

#ad